Ping (P)

Versions
Release Notes
- SAKA 4.20.0
- SAKA 4.19.0
- SAKA 4.18.0
- SAKA 4.17.0
- SAKA 4.15.1
- SAKA 4.14.0
- SAKA 4.13.0
- SAKA 4.12.0
- SAKA 4.11.0
- Upgrading from SAKA 4.x
- Back
Preface
- Default Paths and Filenames
- Third-Party Website References
- Strongkey Welcomes Your Comments!
- Back
KAM Introduction
Architecture
Installation
- Preliminary Steps
- Install Components (Primary)
- Install Components (Secondary)
- Define KCs (Primary)
- Verify KCs (Secondary)
- Set Personal Identification Numbers (PINs) [Primary]
- Set PINs and Complete Key Migration [Secondary]
- Create System Users [Primary]
- Create a New Encryption Domain [Primary]
- Complete Second Domain Key Migration [Secondary]
- Add System Users [Primary]
- Configure the SKCE domain [Primary]
- Replicate the CEM Domain [Secondary]
- Back
CCS Web Service Operations
- CCReturnObject
- Manufacturer Identifiers for Processing CardHolder Data (CHD)
- CCS Module GetCardCaptureData Mechanics
- CCS Module DukptEncrypt Mechanics
- CCS Module DukptDecrypt Mechanics
- CCS Module DukptMAC Mechanics
- CCS Module ReencryptPINBlock Mechanics
- Back
KAM Web Service Operations
- KAM Encryption Mechanics
- KAM Decryption Mechanics
- Notes on the Mechanics
- KAM Deletion Mechanics
- KAM Search Mechanics
- KAM Entropy Mechanics
- KAM General Purpose Key Encryption Mechanics
- KAM General Purpose Key Decryption Mechanics
- KAM Batch Operations
- KAM Relay Mechanics
- HTTPS Interface
- SOAP Interface
- Back
KMS Web Service Operations
- CCReturnObject
- CCKeyComponentType
- CCCryptographicMaterialType
- CCEncryptedAnsiX9241KeyType
- KMS Module loadKeyComponent Mechanics
- KMS Module loadBaseDerivationKey Mechanics
- KMS Module generateBaseDerivationKey Mechanics
- KMS Module generateInitialKey Mechanics
- KMS Module storeAnsiX9241Key Mechanics
- KMS Module replaceAnsiX9241Key Mechanics
- KMS Module deleteAnsiX9241Key Mechanics
- KMS Module updateAnsiX9241Key Mechanics
- Back
TR31 Web Service Operations
- TR31Response
- TR31 Module generateKeypair Mechanics
- TR31 Module listKeypairs Mechanics
- TR31 Module updateKeypairs Mechanics
- TR31 Module storeDigitalCertificate Mechanics
- TR31 Module listDigitalCertificates Mechanics
- TR31 Module updateDigitalCertificate Mechanics
- TR31 Module generateKek Mechanics
- TR31 Module listKeks Mechanics
- TR31 Module updateKek Mechanics
- TR31 Module getPcrToken Mechanics
- TR31 Module decryptData Mechanics
- Back
KAM Batch Operations
- SKLESBatchInput Element
- SKLESBatchOutput Element
- Generating the SBI XML file
- Transferring XML Files to and from the Appliance
- Submitting Batch Operations
- Back
KAM DemoClients
- Installing SAKA Clients
- sakaclient.jar Operations
- skceclient.jar Operations
- sakamclient.jar Operations
- kmsclient.jar Operations
- Back
KAM KCSetPINTool
- Setting KC Preferences
- Changing KC Passwords
- Setting the KC PIN on the SAKA Server
- Back
KAM DACTool
- Changing DA Passwords
- Preferences
- Systems
- Domains
- Users
- Jobs
- Configuration
- Back
KAM Key Migration Tool
- Prerequisites
- Back
KAM KMS ConsoleTool
- Loading Key Components
- Loading a BDK
- Storing ANSI X-924.1 Keys from Key Components
- Storing ANSI X-924.1 Keys from Wrapped Keys
- Back
KAM Configuration
- Immutable Configuration
- Mutable Configuration
- Sample Configuration File
- Back
KAM Key Management
- Cryptographic Hardware Modules
- Back
HSM Integration
- Building the HSM Driver
  - Rebuilding the HSM Driver
  - Back
- HSM Administration Basics
- Clearing the HSM
- Setting Up the HSM
- Backing up the HSM
- Restoring from a Backup
- HSM Battery Replacement
- Back
Managing Credentials
- KAM Credentials
- HSM Credentials
- System Credentials
- Linux strongauth
- Back
Changing Hostname and IP
- Changing the IP Address
- Changing the Hostname
- Back
Internal Repositories
- Repository Requirements
- Choosing an Online Mirror
- Internal Repository Setup
- KA Setup
- Back
Internal Repositories Rocky 9.x
- Repository Requirements
- Choosing an Online Mirror
- Internal Repository Setup
- KA Setup
- Back
Appliance Security
- Physical Security
- Operating System
- Appliance Credentials
- Back
PCI DSS 3.2
- Requirement 3: Protect Stored Cardholder Data
- Requirement 6: Develop and Maintain Secure Systems and Applications
- Back
PCI DSS 4.0.1
KC Responsibilities
Add New SKCE Domain
KAM Replication
- Check Replication
- Replicate Essentials Only
- Disable Replication to Inactive Nodes
- Known Behavior
- Manual Replication For Specific Range of Data
- Back
Appendices
- Adding a Disaster Recovery Backup (DRB) Node to a Cluster
  - Step #1 on an EXISTING server
  - Step #2 on the DRB Node
  - Step #3 on the EXISTING server
  - Step #4 on the DRB node
  - Post-Installation
  - Back
- Adding an Additional Server to a Cluster
  - Step #1 on an EXISTING server
  - Step #2 on the NEW server
  - Step #3 On the EXISTING node
  - Step #4 on the NEW node
  - Back
- Application Development Guide
  - Application Design for “Card Not Present” transactions
  - Storing Encryption Domain Identifier (DID)
  - Securing Decryption Credentials
  - Cluster Communications
  - Relay Processing
  - Summary on “Card Not Present” transactions
  - Back
- Batch Delete Tokens
- CIS Hardening Verification RHEL 7.X
- CIS Hardening Verification ROCKY 9.X
- Cleanup SAKA Disk Space
  - Cleanup Old Distributions and Files
  - Cleanup Database Tables
    - Cleanup Encryption Requests Table
    - Back
  - Back
- Configure Syslog
- Create Software Keystore HSM Credential
- Installing KCSPTool and DACTool on Windows
  - Installation
  - Back
- KA Replace EOL Node
  - Prerequisites
  - Step 1 (On New SAKA)
  - Step 2 (On EOL SAKA)
  - Step 3 (On New SAKA)
  - Step 4 (On EOL SAKA)
  - Step 5 (On New SAKA)
  - Step 6 (On EOL SAKA)
  - Step 7 (On New SAKA)
  - Back
- KAM KC Replace Tool
  - Prerequisites
  - Validating Credentials
  - Recreate a set of Key Custodians
  - Create a new set of Key Custodians
  - Back
- MariaDB Audit Logging Configuration
  - Enable MariaDB Audit Logging
  - Monitoring the MariaDB for Replication anomalies
  - Disable MariaDB Audit Logging
  - The counts_v2.sql file
  - Back
- Migration Information
- Migrating from Centos to Rocky
  - Rocky Linux Kickstart USB Guide
  - Step 1: On an Existing Production Server in the Cluster
  - Step 2: On the Same Machine after Installing Rocky 9.3
  - Back
- Modifying the Appliance's IP Address or Hostname
- Reboot StrongKey Tellaro
  - Pre-Reboot
  - Reboot
  - Post-Reboot
  - Back
- Relay Webservice
  - Mechanics of the Relay
  - Deploying the service
  - Relay Webservice Client
  - HTTP interface
  - SOAP interface
  - Back
- Replace CMOS Battery
- Setting up LACP Bonding on Tellaro KA
- Strongkey Tellaro & Ransomware Protection
- Using Custom SSL/TLS Certificates
  - Generating a TLS certificate with the SAN extension
  - Installing the keystore on SAKA
  - Conclusion
  - Back
- Using a Custom Trust Store
- Using HAProxy as a Load Balancer
- Using the Key Migration Tool (KMTool)
  - Prerequisites
  - Mechanics
  - Details
  - Back
- Test Appliance Funcationality
  - Using pingsaka script
  - Common Errors
  - Back
- Collect KeyAppliance Health Data (SAHC.sh)
  - Run SAHC.sh script
  - SAHC Files
  - Back
- Fix Data Inconsistency in DB
  - Export Data
  - Take Database Backup
  - Import Data on Other Nodes
  - Back
- Create Linux User For BatchRequest
- Back

Syntax

java -jar sakamclient.jar  <hostport> <did> <password> P

Values

Value	Explanation
hostport	Host and port to access the SAKA SOAP and REST formats: http://<FQDN>:<non-ssl-portnumber> or https://<FQDN>:<ssl-portnumber> Example: https://saka.strongauth.com:8181
did	Unique domain identifier that belongs to SAKA
password	The password for the 'pinguser' user.

Value

Explanation

hostport

Host and port to access the SAKA SOAP and REST formats:

http://<FQDN>:<non-ssl-portnumber> or

https://<FQDN>:<ssl-portnumber>

Example: https://saka.strongauth.com:8181

did

Unique domain identifier that belongs to SAKA

password

The password for the 'pinguser' user.

Output

$ example:~/topaz> java -jar sakamclient.jar https://saka1.strongkey.com:8181 1 Abcd1234! P
NOTE: Picked up JDK_JAVA_OPTIONS: --add-opens java.base/java.util=ALL-UNNAMED --add-opens java.base/java.lang=ALL-UNNAMED --add-opens java.base/java.lang.reflect=ALL-UNNAMED --add-opens java.base/java.io=ALL-UNNAMED --add-opens java.management/javax.management.openmbean=ALL-UNNAMED --add-opens java.management/javax.management=ALL-UNNAMED --add-opens java.base/sun.security.provider=ALL-UNNAMED
Ping-Thread-00 pinging EncryptionService at https://saka1.strongkey.com:8181..
StrongAuth, Inc. KeyAppliance 4.20.0
Hostname: saka1.strongkey.com (ServerID: 1)
Current time: Thu Jul 09 09:56:43 PDT 2026
Up since: Mon Jul 06 13:40:56 PDT 2026
Well-known PAN: 1111000000001111
ENC: 6/11
DEC: 15/21
DEL: 2/2
SRC: 0/0
BAT: 0/0
RLY: 0/0
RNG: 0/1048576
SAKA Domain 1 is alive!